Flush Mount Track

Our Flush Mount Track has been created for installation during the construction phase, and provides the strongest discreet track system on the market today. It blends seamlessly with the building structure and provides a readily accessible fixing, enabling artworks to be hung at any point and any height.

This is our most robust track. With the right installation it will carry loads in excess of 1000 lbs..  and yet.. it’s our most discreet, with a slot of just 5/32".

The Flush Mount is very easy to use. Artworks can be hung from clips inserted at any point along the track, and suspended using a choice of transparent cord, stainless steel cable or stainless steel rod, and because the track is completely flush with the wall, we even have a clip for you to hang the picture directly onto the track.


DIMENSIONS and FINISH

Flush Mount Track is an anodised aluminum extrusion that is available in either soft silver finish or white and is supplied in lengths of 8' 2". It comes pre-drilled and is easy to cut to length on site.

Flush Mount Track - 2.5 Mtrs - Silver

Please contact Eloise Wierzbicki for the best price.

Flush Mount Track - 2.5 Mtrs - White

Please contact Eloise Wierzbicki for the best price.

ACCESSORIES TO WORK WITH THE FLUSH MOUNT TRACK

There is a choice of accessories that will work with the H Track to provide the look to suit your installation. The accessories are sold in sets that include a pair of hanging lengths, top blocks and fixings. You will need a set per work, and can choose either a barrel for use with our Ryman Hanger, or a hook if your work will be hung with a wire. All accessories can also be purchased separately here should you want to hang more than one work per hanging length set.

Perlon Cord Hanging Set. Transparent nylon cord, unobtrusive and will carry artworks up to 45 lbs.

F Track Cable Hanging Set - 1500mm Perlon Cable - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Cable Hanging Set - 1500mm Perlon Cable - Hook

Please contact Eloise Wierzbicki for the best price.

F Track Cable Hanging Set - 2500mm Perlon Cable - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Cable Hanging Set - 2500mm Perlon Cable - Hook

Please contact Eloise Wierzbicki for the best price.

Stainless Steel Cable Hanging Set. Clean contemporary look, for artworks up to 65 lbs.

F Track Cable Hanging Set - 1500mm SS Cable - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Cable Hanging Set - 1500mm SS Cable - Hook

Please contact Eloise Wierzbicki for the best price.

F Track Cable Hanging Set - 2500mm SS Cable - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Cable Hanging Set - 2500mm SS Cable - Hook

Please contact Eloise Wierzbicki for the best price.

Stainless Steel 5mm Rod Hanging Set. Simple and strong, available as stainless steel or white, for artworks up to 330 lbs.

F Track Rod Hanging Set - 1500mm SS Rods - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Rod Hanging Set - 1500mm SS Rods - Hook

Please contact Eloise Wierzbicki for the best price.

F Track Rod Hanging Set - 1500mm White Rods - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Rod Hanging Set - 1500mm White Rods - Hook

Please contact Eloise Wierzbicki for the best price.

F Track Rod Hanging Set - 2500mm SS Rods - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Rod Hanging Set - 2500mm SS Rods - Hook

Please contact Eloise Wierzbicki for the best price.

F Track Rod Hanging Set - 2500mm White Rods - Barrel

Please contact Eloise Wierzbicki for the best price.

F Track Rod Hanging Set - 2500mm White Rods - Hook

Please contact Eloise Wierzbicki for the best price.

All of these products are held in stock. Other lengths can be produced to order.

USEFUL TIPS AND GUIDELINES

For the best result we recommend installation during the construction phase of your project. After fixing, most of the track is then covered by the drywall cladding, meaning that the Flush Mount Track becomes a seamless element of the building.

The track comes pre-drilled ready for fixing. If you wish to hang very heavy artworks (in excess of 250 lbs) then we recommend drilling more frequent fixing points. The track can then sustain loads in excess of 1100 lbs with the appropriate clips and rods. We recommend that you contact us for larger top blocks.

INSTALLATION INSTRUCTIONS

  1. The track comes pre-drilled so just screw into place making sure that the edge marked top is uppermost. Refer to the illustration below if in doubt. Repeat this process for the second section after inserting one of the pins (supplied) halfway into the 2mm opening at the end of the track and use this pin to engage with the next section. This will ensure all the tracks align beautifully.
    This track is the strongest discreet track on the market. If you intend to hang very heavy works (in excess of 250 lbs) then we recommend drilling additional holes along the top edge.
  2. When the track is installed, the drywall is applied over the top of the fixing flanges so that only the core of the track remains visible. The drywall can then be skimmed where required and the extrusion has a small ‘tooth’ to the edge of the lip to aid the application of a skim coat. We recommend applying a strip of 15mm masking tape to the face of the track for protection during this process.

Hanging your Artworks:

With Perlon cord, feed the cord through the top block and ‘hook’ it into the track.

With stainless cable, feed the cord through the top block and ‘hook’ it into the track.

With stainless rods, hook the top block into the track and screw the rods into place from beneath.

Slide the appropriate barrel up the cord or rod from the bottom and tighten at the required height with the bolt heads facing toward you. It’s much easier to do this with the two lengths side by side so that the barrel heights match.

For artworks with cord on the back, just place the cord over the hook. If you are using the Small Ryman Hanger, hook it over the small bolt and discard the large one and vice versa for the Large Ryman Hanger. For maximum strength be sure to tighten both the bolt (using a screwdriver) and the grub screw (using an allen key).

With the rods at the correct distance apart, the artwork is lifted into place so that the protruding boltheads engage with the the Ryman plate on the back of the artwork.