Information Stand

Our Information Stand is the ideal means to display directions, information or instructions in a clear 45 degree presentation at a height that is easy to read. The display can be either 8 1/2" x 11" or 11" x 14" with the ability to switch between portrait or landscape formats mounted on an upright post with a stable base plate.

Information is displayed with the protection of a clear acrylic cover a little over 1/16" thick.

DIMENSIONS and FINISH

The Information Stand has an overall height of 43' (using 8 1/2" x 11") 1 1/4" dia upright and 13" diameter stable base plate. It is available in either Stainless Steel or PPC Grey (a hard wearing baked on finish). Signage Plates are purchased separately

Information Stand PPC Grey

Please contact Eloise Wierzbicki for the best price.

Information Stand SS

Please contact Eloise Wierzbicki for the best price.

Aluminium Signage Plate - 8.5in x 11in (US) with End Strips

Please contact Eloise Wierzbicki for the best price.

Aluminium Signage Plate - 11in x 14in (US) with End Strips

Please contact Eloise Wierzbicki for the best price.

USEFUL TIPS AND GUIDELINES

Both finishes for this stand are hard wearing and will provide years of service indoors. Whilst the stainless steel version is capable of being used outside, we do not recommend this as the display is not hermetically sealed.

INSTALLATION INSTRUCTIONS

  1. Assemble the Information Stand by placing the stainless steel cover over the heavy black baseplate.
  2. Remove the bolt from the end of the upright, fit the washer onto the bolt and place it through the central hole of the base plate and cover and into the end of the upright. Tighten securely with the Allen Key provided.
  3. Using a cross head screw driver, remove one of the end caps from the signage plate and slide onto the angled square on the top of the upright so that it engages in the slots on the back of the signage plate. When central, lock in place by tightening the small grub screw from the rear.
  4. Slide the acrylic cover out, remove the protective film.. from both sides!.. slide your artwork in and replace the cover. Screw the end cap back into position.