Label Holders

The Label Holder is an industry standard.. this is one product that we haven’t invented. Having said that, we have completely re-engineered it, to make it slimmer, stronger, cheaper.

The objective is to offer information in the simplest, least distracting manner possible, and the Label Holder does this by displaying information about the artwork in an easy to read and discreet manner. Close enough to inform but not so close as to distract. The Label Holder works by sliding the cover to one side and inserting the information ‘label’.

DIMENSIONS and FINISH

Aluminum backed Label Holder.

This version of our Label Holder has a thin extruded aluminum backplate with a clear acrylic cover. It has the advantage of being extremely slim, robust (will last far longer than the all acrylic version), cost effective and comes with a single screw fixing (on the smaller sizes) to aid positioning and leveling.

Aluminium Label Holder - 4" x 2"

Please contact Eloise Wierzbicki for the best price.

Aluminium Label Holder - 6" x 4"

Please contact Eloise Wierzbicki for the best price.

Aluminium Label Holder - 6" x 6"

Please contact Eloise Wierzbicki for the best price.

Aluminium Label Holder - 6" x 8.5" Portrait

Please contact Eloise Wierzbicki for the best price.

Aluminium Label Holder- A5 - Landscape

Please contact Eloise Wierzbicki for the best price.

Aluminium Label Holder - 8 1/4" x 11 3/4" ( A4)

Please contact Eloise Wierzbicki for the best price.

Aluminum Label Holder - 8 1/4" x 11 3/4" (A4) - Landscape

Please contact Eloise Wierzbicki for the best price.

Aluminium Label Holder - 8.5in x 11in (US)

Please contact Eloise Wierzbicki for the best price.

Aluminium Label Holder - 11in x 14in (US)

Please contact Eloise Wierzbicki for the best price.

All of the above Label Holders can be ordered with low reflect acrylic on request.


Signage Plate.
In addition to our range of Label holders, we also produce the following sizes of Signage plates. They are our standard Label Holders with 'end caps' applied to each side. This enables the Signage Plate to be used in either portrait or landscape mode without the acrylic sliding out. The end caps are held in place with two small screws.

Aluminium Signage Plate - 8.5in x 11in (US) with End Strips

Please contact Eloise Wierzbicki for the best price.

Aluminium Signage Plate - 11in x 14in (US) with End Strips

Please contact Eloise Wierzbicki for the best price.

Aluminium Signage Plate - 11in x 17in (US) with End Strips

Please contact Eloise Wierzbicki for the best price.

 

All Acrylic Label Holder.

This is the more traditional version of the Label Holder which does everything the aluminum backed version can although it is slightly thicker. Please be aware that the covers cannot be interchanged. They are individuals. They also come with a single screw fixing (on the smaller sizes) to aid positioning and leveling.

4" x 2" high all acrylic label holder.

$20.50 - Please contact us to order

6' x 4" high all acrylic label holder.

$26.00 - Please contact us to order

6" x 6" high all acrylic label holder.

$28.50 - Please contact us to order

6" x 8 1/4" high all acrylic label holder.

$34.00 - Please contact us to order

8 1/2" x 11"  high all acrylic label holder.

$68.00 - Please contact us to order

14" x 11"  high all acrylic label holder.

$80.00 - Please contact us to order

ACCESSORIES TO WORK WITH THE LABEL HOLDERS

For instances where it is not convenient to mount a label holder on a nearby wall, you can use one of our Freestanding barriers with a Freestanding Barrier Signage adaptor.

USEFUL TIPS AND GUIDELINES

For the smaller sizes of Label Holder with a single screw fixing, displays that may be subject to touching by the public, can be ‘fixed in place’ by putting a small dab of blue tack in one corner on the back of the Label Holder. Then when the holder is level and the screw tightened, it will remain in that position.

When installing on a fabric covered wall, a screw fixing will probably damage the surface of the material. In this instance we recommend using one of the hardened steel pins with a shallow brass head from picture hanger hooks, as these will sit within the countersink and pierce between the fabric threads leaving little or not damage, even, when done carefully, on silk covered walls.

INSTALLATION INSTRUCTIONS

The Label Holder should be fixed to the wall in relative proximity to the artwork on display. Close enough that it is obvious the label relates to that artwork, but with enough space between so that the artwork can 'breathe'.