Q Barrier Signage

Our signage plate connectors are designed to replace a Q' Barrier cap and provide a robust display for information or directional signage. The connectors are available in either forty five degree or vertical formats. Once in place you can add one of our signage plates, 8 1/2" x 11" or 11" x 14" or 11" x 17", and these can be changed between portrait or landscape orientation as required.

 

 

These signage connectors can be fitted to any upright from our Q barrier range.

DIMENSIONS and FINISH

The signage plate connectors are manufactured from stainless steel and available in four versions:

Q Barrier 45 Degree Signage Adapter

Please contact Eloise Wierzbicki for the best price.

Q Barrier Vertical Signage Adapter

Please contact Eloise Wierzbicki for the best price.

Please contact Eloise Wierzbicki for the best price.

Please contact Eloise Wierzbicki for the best price.

Please contact Eloise Wierzbicki for the best price.

USEFUL TIPS AND GUIDELINES

We recommend replacing the Q Barrier cap with the Signage Plate adaptor before adding the signage as this makes it slightly easier to handle.

If fitting a Signage Plate adaptor to either a Floor Mounted Q Barrier or Screw Fixed Q barrier, we recommend attaching it prior to the initial installation to ensure the best alignment of the display.

INSTALLATION INSTRUCTIONS

  1. Unscrew the Q Barrier cap and replace with the Signage Plate adaptor. Tighten into place.
  2. Unscrew one end cap from the Signage Plate and insert the artwork. Then slide the 4" square plate on the connector into the grooves on the rear of the signage plate.
  3. Once in the desired position, lock in place by gently tightening the small grub screw with the allen key provided and screw the end cap back into place.